高精度直升机机载LiDAR在高速公路改扩建勘测中的应用可行性研究          下载免费PDF全文

郑伟安 《山东国土资源》2018,34(8)

机载LiDAR在公路勘测方面的用途日益广泛。该文对直升机机载LiDAR在高速公路改扩建中的应用技术路线可行性进行了研究论证,从地面控制测量、点云数据获取、点云数据处理、成果应用等多个方面进行了阐述,通过分析LiDAR点云数据在5种不同地面控制点布设方案校正下的点云数据精度,论证了利用地面控制点对直升机机载LiDAR点云数据进行平面和高程校正的可行性。  相似文献   

基于纹理特征的围填海SAR图像分水岭分割方法          下载免费PDF全文

王衍  许小贝  洪海凌 《海洋学研究》2018,36(2):44-49

本文提出了一种基于纹理特征的围填海SAR图像分水岭分割方法,首先对机载MiniSAR图像进行灰度共生矩阵纹理滤波,获得纹理特征图像,再对纹理特征图像进行分水岭算法分割,将获得的形态学重建图像进行门限阈值分割,得到最后的二值化分割结果。该方法一方面通过调整灰度共生矩阵纹理滤波的窗口大小,抑制了斑点噪声的影响;另一方面,利用分水岭算法对边缘模糊杂乱图像的优势,提高了围填海信息提取的准确性。实验结果表明,本方法对高分辨率SAR图像围填海监测图像的分割效果良好。  相似文献   

Lidar-aided analysis of boreal forest backscatter at Ku band     

《International Journal of Applied Earth Observation and Geoinformation》2020

This paper analyzes the backscatter of the microwave signal in a boreal forest environment based on a Ku -band airborne Frequency-Modulated Continuous Waveform (FMCW) profiling radar—Tomoradar. We selected a half-managed boreal forest in the southern part of Finland for a field test. By decomposing the waveform collected by the Tomoradar, the vertical canopy structure was achieved. Based on the amplitude of the waveform, the Backscattered Energy Ratio of Canopy-to-Total (BERCT) was calculated. Meanwhile, the canopy fraction was derived from the corresponding point cloud recorded by a Velodyne VLP-16 LiDAR mounted on the same platform. Lidar-derived canopy fraction was obtained by counting the number of the first/ the strongest returns versus the total amount of returns. Qualitative and quantitative analysis of radar-derived BERCT on lidar-derived canopy fraction and canopy height are investigated. A fitted model is derived to describe the Ku-band microwave backscatter in the boreal forest to numerically analyze the proportion contributed by four factors: lidar-derived canopy fraction, radar-derived canopy height, the radar-derived distance between trees and radar sensor and other factors, from co-polarization Tomoradar measurements. The Root Mean Squared Error (RMSE) of the proposed model was 0.0958, and the coefficient of determination R2 was 0.912. The fitted model reveals that the correlation coefficient between radar-derived BERCT and lidar-derived canopy fraction is 0.84, which illustrates that lidar surface reflection explains the majority of the profiling /waveform radar response. Thus, vertical canopy structure derived from lidar can be used for the benefit of radar analysis.  相似文献   

基于LiDAR的农田地形环境三维重建方法     

郎朗  冯晓蓉  刘浪 《测绘通报》2020,(2):55-60

为克服传统农田土地平整测量方法耗时费力的特点，提出采用LiDAR技术对农田地形进行重建的探索性研究。通过HDL-32E型激光雷达等搭建了系统的硬件平台，应用C++语言编写了系统数据的采集程序；在此基础上对激光雷达所采集数据进行了标定，研究了农田地形重建系统中不同坐标系的转换方法；同时基于最小值去噪法设计了更适用于农田地形点云去噪的均值限差去噪法。通过对比在农田起伏较大区域不同坡度范围内RTK与激光雷达所测单元个数，对系统精度进行了评价；最后实现了车载农田地形重建系统的界面显示、应用与精度评估。结果表明，在10°~15°、25°~30°大坡度范围内激光雷达所获农田地形更为丰富，精度更高。该方法重建的农田地形模型点云数据和原始农田地形点云数据投影面积逼近度可达93%，验证了本文研究方法应用于农田地形环境重建的可行性，同时为今后的土地精细平整工作提供了理论参考与依据。  相似文献   

Moving from plot-based to hillslope-scale assessments of savanna vegetation structure with long-range terrestrial laser scanning (LR-TLS)     

《International Journal of Applied Earth Observation and Geoinformation》2020

Reliable quantification of savanna vegetation structure is critical for accurate carbon accounting and biodiversity assessment under changing climate and land-use conditions. Inventories of fine-scale vegetation structural attributes are typically conducted from field-based plots or transects, while large-area monitoring relies on a combination of airborne and satellite remote sensing. Both of these approaches have their strengths and limitations, but terrestrial laser scanning (TLS) has emerged as the benchmark for vegetation structural parameterization – recording and quantifying 3D structural detail that is not possible from manual field-based or airborne/spaceborne methods. However, traditional TLS approaches suffer from similar spatial constraints as field-based inventories. Given their small areal coverage, standard TLS plots may fail to capture the heterogeneity of landscapes in which they are embedded. Here we test the potential of long-range (>2000 m) terrestrial laser scanning (LR-TLS) to provide rapid and robust assessment of savanna vegetation 3D structure at hillslope scales. We used LR-TLS to sample entire savanna hillslopes from topographic vantage points and collected coincident plot-scale (1 ha) TLS scans at increasing distances from the LR-TLS station. We merged multiple TLS scans at the plot scale to provide the reference structure, and evaluated how 3D metrics derived from LR-TLS deviated from this baseline with increasing distance. Our results show that despite diluted point density and increased beam divergence with distance, LR-TLS can reliably characterize tree height (RMSE = 0.25–1.45 m) and canopy cover (RMSE = 5.67–15.91%) at distances of up to 500 m in open savanna woodlands. When aggregated to the same sampling grain as leading spaceborne vegetation products (10–30 m), our findings show potential for LR-TLS to play a key role in constraining satellite-based structural estimates in savannas over larger areas than traditional TLS sampling can provide.  相似文献   

应用于砂岩型铀矿找矿的遥感-航测信息集成模型构建     

聂俊兵  周铭  谢迎春  李名松 《地质科技情报》2008,27(1):99-102,107

应用遥感-航测(航放和航磁)信息集成技术,针对砂岩型铀矿找矿的几个重要条件:如盆地内部构造、含矿目的层、水文条件和矿化条件,构建了构造、岩性、水文和矿化4种信息集成模型.将这4种信息集成模型应用于示范区,在已知的矿化地段得到的结果与实际勘探的成果符合较好,提高了预测的准确性.  相似文献   

激光雷达技术在我国地形测图中应用前景广阔     

宫鹏  ;黄华兵 《测绘软科学研究》2008,(6):45-48

激光雷达技术（Light Detection and Ranging,LiDAR）是近十年来快速发展并得到广泛应用的测量手段。美国地质调查局（USGS）、美国国家宇航局（NASA）以及美国地质学会（AASG）已经开始讨论建设全美高分辨率激光雷达数据库。我国正处于东部城市化、土地利用巨变、西部无图而经济高速发展的时期,国家、地方、企业生产单位迫切需要现实性强、精确度高、比例尺大的地形数据产品。满足这些要求的主要途径是采用激光雷达这一先进的测绘技术。我们建议国家、地方与企业统筹规划,各司其职,努力建设我国的激光雷达基础数据库。本文通过Stoker等（2008）介绍的第二届全美激光雷达战略研讨会上论述的激光雷达技术特点、激光雷达数据的科学需求与应用以及商业化运作问题,结合我国目前的激光雷达发展趋势、测绘数据需求以及土地利用变化监测等科学问题,简析激光雷达技术在我国的应用前景。  相似文献   

不同激光扫描数据组拼接的一种新方法   总被引：2，自引：1，他引：1  

刘念  闫春斌  马文涛  李宏建  陈召军 《测绘科学》2008,33(4)

激光扫描测量技术在三维城市建模领域的应用具有良好的发展前景。但是,不同精度的扫描数据组的拼接是目前需要解决的主要问题之一,本文对不同精度的数据组的拼接进行了实验性研究,并提出了一种新方法。  相似文献   

一种改进的基于坡度变化的机载激光雷达点云滤波方法   总被引：2，自引：0，他引：2  

杨洋  张永生  邹晓亮  张皓 《测绘科学》2008,(Z1)

机载激光点云数据滤波是获取高精度数字表面模型和数字高程模型的关键。本文分析了几种重要的滤波算法,在研究基于坡度变化的滤波算法的基础上,提出一种改进的分块滤波处理的方法。实验表明:该方法能有效对点云数据进行分类。  相似文献   

航空重力测量数学模型及其测量精度分析     

WANG Li-hong    ZHANG Chuan-ding  WANG Jun-qin  NIE Guo-xing 《测绘学院学报》2008,(1)

基于数学和分析力学角度分别推导了航空矢量重力测量的数学模型,得到了一致的模型公式;给出了矢量模型的3个分量形式,其中垂直方向的分量就是标量重力测量的数学模型;简要介绍了我国研制成功的航空标量重力测量系统CHAGS的数据处理的过程,分析了标量重力测量中测线交叉点和重复测线的重力异常的精度;根据实测数据计算的结果表明:测线交叉点重力异常不符值的标准差约为5×10-5ms-2左右,重复测线的内符合精度优于5×10-5ms-2,达到了预期的要求。  相似文献